You have no items in your shopping cart.

Subtotal: £0.00

image

More Views

EVERBUILD STIX-ALL EXTREME POWER 300ML ADHESIVE AND SEALANT HYBRID POLYMER BOND AND SEAL

Be the first to review this product

Availability: In stock

£5.90

* Required Fields

£5.90

Details

EVERBUILD STIX-ALL is a one part, chemically curing solvent free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves        

 

Benefits

 

  • Incredible initial grab, no slip and gap filling properties.
  • High bonding strength
  • Interior and Exterior Use
  • Can be applied to Wet Surfaces
  • Totally Waterproof & Weatherproof
  • Quick Curing.
  • Overpaintable if required
  • Powerful biocide prevents mould growth
  • Solvent Free
  • Resistant to temperature extremes -40°C to +150°C
  • Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents)
  • Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc etc.

 

Areas For Use

 

  • Sealing and bonding in almost every application imaginable. The following are just some examples.
  • As a high quality nail replacement adhesive, even to damp surfaces.
  • External and internal perimeter pointing around doors and windows, especially in mobile structures such as caravans and boats.
  • Bonding mirrors to most common substrates.
  • Automotive gap filling and sealing
  • Sealing vertical expansion joints.                          
  • Jointing cladding panels.
  • Bonding difficult materials such as specialised polymer systems, metals and fibreglass
  • Any application requiring high performance, durable sealing and bonding of joints.
  • Applications where resistance to chemical spillage is required (garage forecourts etc)

         

Surface Preparation

 

All surfaces must be clean and dust free. Surfaces may be damp, but have no standing water.

 

Application

 

 

 

Cartridge - Cut the tip of the cartridge taking care not to damage the thread. Fix nozzle, cut aperture to required width and apply with a standard sealant gun.

 

 

 

As a nail replacement (panel) adhesive.

 

  • Surfaces must be sound, clean, dry and free from dust, grease, loose material etc.
  • Prime dusty surfaces with EVERBUILD PVA BOND diluted 1:4 with water and allow to dry.
  • Apply using a standard sealant gun, cut tip of cartridge, apply nozzle and cut an opening to suite the required bead size.
  • For bonding heavy items (Plasterboard/worktops/wall panels etc) apply adhesive all the way around the edge of the item (30-50mm from edge) and cover back with beads of adhesive at 300mm intervals. Alternatively, apply adhesive direct to battens and press into place. NOTE.
  • With heavy items, always provide temporary support until the adhesive dries.
  • For bonding lightweight items (covings, dado rails, skirting etc) apply adhesive to back of item in one or two continuous beads and press immediately into place.
  • Where gap filling is required, mark the areas where there is a large gap and apply a thicker bead to these areas.
  • In all cases, clean up excess adhesive immediately with a cloth/white spirits

 

As a sealant

 

Reference should be made to the recommended joint ratios.  If necessary reduce joint depth using Everflex Expanding Foam, or Joint backer rod.  Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.

 

Where the sealant is used in a joint configuration, masking tape should be used to prevent contamination of adjacent substrates, and ensure a neat sealing line. Masking tape should be removed immediately after tooling. The joint should be tooled within 5 minutes of application to ensure good contact between the sealant and the substrate.  Tooling of the sealant also gives a smooth, professional finish.

 

Fixing mirrors

 

Apply 6mm diameter beads of sealant direct to back of mirror in vertical strips, spaced at 30-40mm centers. Immediately place mirror in position and secure with good, even pressure with a slight twist action. Provide temporary support (tape) until adhesive has dried (24-48 hours).  If required, STIX-ALL may also be used to seal around mirror 24 hours after fixing (to allow for cure)

 

Uncured material can be removed by wiping with a dampened cloth with white spirit.  Cured material can be carefully removed by mechanical means. Full cure must be allowed before over painting.

 

Specific Data

 

 

Consistency

Pasty

Density

1.50 ± 0.05

Application Temperature

5 to 35°C

Skin Formation at 23°C and 50% RH

30 ± 10 min

Sagging (ISO 7390)

Nil

Curing at 23°C and 50% RH

> 3mm / 24hr

Shore A Hardness (ISO 868 – 3 seconds)

55 – 60

Modulus at 100% Elongation (ISO 8339)

> 0.60MPa

Elongation @ Break (ISO 8339)

> 60%

Tensile Strength (ISO 8339)

> 1.5 Mpa

Shrinkage (ISO 10563)

< 2%

Resistance To UV Radiation

Excellent

Compatibility With Paints

Water based: yes (test compatibility)

Solvent based: no (with alkyd paints)

Temperature Resistance

-40 to +150°C

Coverage

Approximately 11 linear meters per cartridge

Approximately 3 linear meters per squeezy pack

 

 

Health & Safety

 

Consult MSDS for full list of hazards.

 

Storage

 

Store in cool dry conditions between + 5°C and 25°C. 

 

Shelf Life

 

12 months in original unopened containers.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERBUILD STIX-ALL EXTREME POWER 300ML ADHESIVE AND SEALANT HYBRID POLYMER BOND AND SEAL

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand