RUSTINS RADIATOR PAINT ENAMEL SATIN/GLOSS WHITE SOLVENT BASED NON-YELLOWING

A heat resistant, low odour solvent based brilliant white enamel that stays white and does not yellow with heat. Available in gloss and satin finishes. Not to be used on oil filled electric radiators. Sizes: 250ml, 500ml

Intended Use

On all central heating, hot water radiators, but not oil filled radiators. Special Features High gloss non-yellowing white paint. Also suitable for use on wood.

Preparation

The surface must be clean, smooth, sound, dry, free from wax, dust and contaminates. If the radiator is new and factory primed, apply 1 coat of Rustins White Oil-based Undercoat before applying the radiator paint. Radiators stripped to bare metal should be given one coat of Rustin’s Red Oxide Metal Primer and one coat of oil based white undercoat or Rustin’s Quick Dry White Primer/Undercoat. If oil based undercoat is used leave for 24 hours.

Application

Use a good quality brush and apply evenly to cold radiators.

Coats

1 coat is usually sufficient. If a second coat is necessary, leave first coat for 24 hours or turn on full heat for 4 hours once touch dry.

Drying Time

4-8 hours depending on temperature and humidity.

Re-coating Time

24 hours, or 4 hours if radiator is left on full heat.

Application Temp.

Ideally 15-25°C. Do not use below 5°C, or in conditions of high humidity.

Coverage

 

 Approx. 3.25 sq.metres or 35 sq ft per 250ml tin