You have no items in your shopping cart.

Subtotal: £0.00

image

More Views

BOND-IT PVA ADHESIVE AND SEALER PRIMER & BONDING AGENT 500ml/1l/2.5L/5L/25L PLASTER

Be the first to review this product

Availability: In stock

£4.25

* Required Fields

£4.25

Details

A plasticised, premium PVA resin emulsion with good adhesion to porous materials.

Uses

PVA ADHESIVE & SEALER can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing applications or addition to cement and plaster to improve adhesion and cure. Conforms to BS5270.

Applications:

  • Plaster primer, porous surface primer and sealer.

 

  • Rendering key coat.

 

  • Admixture.

 

  • Dust sealer.

 

  • General purpose adhesive for bonding all common construction materials.

 

  • Phthalate free formulation.

Preparation

All surfaces must be clean, dry and free from dust, grease or contaminants that may hinder adhesion. Remove all loose material and ensure underlying material is strong enough to take the weight or load to be applied. If required, a sealing/priming coat should be applied and allowed to dry thoroughly prior to the application of BOND IT PVA ADHESIVE & SEALER.

Application

Stir well before use.

As a primer:

 Suitable as a primer for sand/cement screeds and renderings, for bonding new plaster onto old plaster, on porous brick, stone, floor tiles and new plaster board. Dilute 1 part PVA with 4 parts water and mix well. Apply using a brush, working material well into crevices and gaps. Allow the coat to dry before continuing.

  • For cement: Dilute 1 part PVA to 1 part gauging water.

 

  • For Plaster: Dilute 1 part PVA to 5 parts gauging water.

 

  • For dustproofing: As for priming.

Key Coat & Bonding Aid:

 

For use as a key coat for new plaster, concrete repairs, cement screeds and renders. After priming absorbent surfaces mix 2 parts PVA with 1 part water and apply topping while the coating is still tacky.

 

As a key coat for ceramic tiles and painted surfaces, first ensure that the surfaces will withstand loading of new plaster. Apply BOND IT PVA undiluted and trowel on plaster whilst still tacky. As a key coat for lightweight plasters over painted ceramic tile surfaces and heavy duty cement rendering (over 9mm). Mix 1 part PVA with 1 part water and use to slurry a blend of 1 part Portland Cement to 2 parts clean sharp sand and apply with a notched trowel. Allow to dry for a minimum of 24 hours and then apply a top coat of plaster or cement. Key Coat for porous and rough surfaces, bonding paving, terrazzo, quarry, slate and floor tiles. Prime the floor and back of the tiles as specified under priming. Mix 3 parts PVA with 1 part water and coat floor and tile backs. While still tacky apply sand and cement slurry to the floor and bed in the tiles. The bedding should be of a minimum 3mm.

As an adhesive:

Apply to one side and bring together within 3-5 minutes, apply constant moderate pressure by clamps or weights.

Storage Conditions

Shelf life is 12 months when stored in cool, dry conditions.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: BOND-IT PVA ADHESIVE AND SEALER PRIMER & BONDING AGENT 500ml/1l/2.5L/5L/25L PLASTER

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand