You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

ISOMAT MULTIFILL EPOXY GLITTER GROUT 2 COMPONENT WALL AND FLOOR 10 COLOURS 2KG

Be the first to review this product

Availability: In stock

£48.00

* Required Fields

£48.00

Details

MULTIFILL-EPOXY GLITTER is a 2 component solvent-free epoxy grout. It has high compressive, flexural and adhesive strength. With the addition of the special glitter

ISOMAT GLITTER into MULTIFILL EPOXY GLITTER, is created a grout with particular aesthetic metalized effect. MULTIFILLEPOXY GLITTER is resistant to several acids, alkalis, corrosive agents for concrete, cleaning agents, sea water and salted water. It has excellent workability and is easily cleaned with water before hardening. Suitable for joint width 1,5-12 mm. Classified as a RG tile grout according to EN

13888.

 

Fields of application

MULTIFILL-EPOXY GLITTER is applied to achieve a grout with special aesthetic finish, due to the reflection of light caused by the special glitters ISOMAT-GLITTER.

Furthermore it is used wherever high chemical resistance and mechanical strength is required. It is ideally combined with glass mosaic tiles and with high chemical resistant tiles. It is suitable for pointing wall or floor tile joints in residences, restaurants, showrooms, commercial areas, industrial areas etc.

 

Technical data

Base: 2-component epoxy resin

Colours: 10 selected

100 Silver

110 Green

120 Turquoise

130 Violet

140 Pink

150 Red

160 Red brown

170 Bronze

180 Beige

190 Gold

 

Directions for use

 

1. Mixing of the components

Components A (resin) and B (hardener) are packed in two separate containers, in predetermined mixing proportion by weight. The whole quantity of component B is added into component A. Mixing of the 2 components should take place for approx. 3 minutes, using a low revolution mixer (300 rpm). It is important to stir the mixture thoroughly near the sides and bottom of the container, to achieve uniform dispersion of the hardener.

Next, the glitter ISOMAT GLITTER is added, 10% by weight of MULTIFILL EPOXY GLITTER (Each 2 kg package of MULTIFILL EPOXY GLITTER is mixed with one package of 200 g of ISOMAT GLITTER) and continue to stir until the glitter is uniformly dispersed in the mixture.

 

2. Application procedure

Pointing of the tile joints

The resulting mixture is gradually poured in the dry and clean joints and it is spread using a rubber float in a diagonal direction to the joints, in order to fill them completely and to remove the excessive material.

 

Cleaning of the tile surface

The small quantity of the epoxy grout that remains on the floor tiles surface is emulsified by being rubbed with a slightly wetted hard sponge and it is wiped away immediately.

Subsequently, the tiles surface is cleaned again with a soft clean and slightly wetted sponge. The use of lukewarm water makes cleaning easier. For even easier cleaning 10% spirit (by weight) may be added in the water used.

 

 

Packaging

MULTIFILL-EPOXY GLITTER is available in packages of 2 kg (A+B) and ISOMAT

GLITTER in packages of 200 g. A and B components are in pre-determined mixing proportion by weight. The container of component B is built in the container of component A.

 

Shelf-life - Storage

12 months from date of production if stored in original sealed packaging, in areas protected from humidity and direct sun exposure. Recommended storage temperature between

+5°C and +35°C.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: ISOMAT MULTIFILL EPOXY GLITTER GROUT 2 COMPONENT WALL AND FLOOR 10 COLOURS 2KG

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand