BOND-IT MULTI-PURPOSE SPRAY LUBRICANT 400ML MULTI PURPOSE RUST ANTI-CORROSIVE BOLTS NUTS

A low viscosity solvent and oil blend giving excellent penetrating, de-watering and lubricating properties. Supplied in 200ml aerosol cans with a straw for accurate dispensing.

Uses

MULTI-PURPOSE SPRAY LUBRICANT is a high performance, multi-application fluid which has excellent anti-corrosive properties. It can be used for a wide range of demanding uses for automotive and general engineering. Suitable for freeing seized fasteners particularly where corrosion is a problem. Also as a general purpose lubricant and cleaner to free tight linkages. Displaces moisture and condensation from material surfaces. Light duty lubricant which can be directed towards hard to access components.

Preparation

Ensure surfaces are clean, dry and grease and oil free.

Application

Attach the straw to the nozzle and aim at the component, keeping the can upright. For seized parts allow to penetrate from all angles for some seconds and progressively loosen adding more lubricant as the threads free. For stiff linkages remove old grease or dirt and direct the jet onto the linkage until free of old build up, activate linkage to allow full penetration. Reseal with fresh grease for heavy duty applications. To displace moisture wipe away excess then spray a light coat across all surfaces. Do not spray at hot surfaces or live electrical systems.

Storage Conditions

Store below 50°C in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Observe the label precautions. MULTI-PURPOSE SPRAY LUBRICANT must be stored in accordance with the flammable liquid storage regulations.