You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

MOULD RELEASE OIL CHEMICAL RELEASING AGENT FOR CONCRETE

Be the first to review this product

Availability: In stock

£21.00

* Required Fields

£21.00

Details

A high quality chemical release agent for use on all types of standard formwork materials. Formulated from highly refined mineral oils, produces a high quality stain and blemish free concrete finish with minimum incidence of blowholes.

Uses

Bond It MOULD RELEASE OIL is a chemical release agent for mould and shutter surfaces prior to casting concrete, giving a clean release. Suitable for use on plywood, timber, steel, ABS, polyurethane and plastic faced formwork.

  • Clean release even with porous materials.
  • Non-staining. Can Be Used With White Cement.
  • High coverage.
  • Water repellant; prevents rust
  • Improved Re-use Of Formwork
  • Suitable for use with potable water structures

Preparation

Ensure all formwork is clean and dry before application.

Application

Supplied ready to use - no need to dilute product. Apply before first pour and re-apply before subsequent pours immediately after stripping and cleaning the mould. Application can be by spray or fine haired brush. Excessive application should be avoided; only a very thin coating should be applied. If, after first application to new timber or plywoood, material is completely absorbed a second application should be made. When applied in accordance with the manufacturer’s coverage recommendations MOULD RELEASE OIL does not have any harmful effects on concrete or on the adhesion of subsequent surface coatings or renders.

Note: Improved performance on plywood and timber moulds can depend on the level of impregnation and the experience of the operative. MOULD RELEASE OIL in general may be used over timber moulds, etc. which have been treated with other mould oils, providing excess has been removed. Spray application should only be with a nozzle giving a fine mist. Over application - ponding on horizontal surfaces can give surface retardation. Mop up all excessive material

Container Size

5 LITRES

Coverage

Up to 60m2 per litre dependent on porosity.

Shelf Life

Store in cool, dry conditions away from heat and naked flame. Use within 24 months.

Storage Conditions

Store in cool, dry conditions between 5 and 30oC.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: MOULD RELEASE OIL CHEMICAL RELEASING AGENT FOR CONCRETE

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand