You have no items in your shopping cart.
Details
Two-component, acid resistant epoxy grout for joints wider than 3 mm
For use in the food industry, industrial floors and walls, swimming pools – especially those containing spa or sea water, laboratory benches, kitchen work surfaces, bathrooms and wet rooms etc
Coverage: Dependent on joint size
Quantity Calculation in mm
Tile width x Tile length / tile width / tile length x joint width x joint depth x 1.6 = KG per metre square
Pot Life: 45 Minutes
Application Temperature : +12-+30c
Consistency of Mix: Thick Paste
WHERE TO USE
Indoor and outdoor grouting of ceramic tile and natural stone floors and walls. Also suitable for acid-resistant bonding and rapid setting of ceramic tiles, stone materials, fibre-cement, concrete and any other building material on all types of substrates normally used in construction.
Kerapoxy allows you to create floors, walls and worktops, etc. in compliance with the HACCP system and the requirements of EC Regulation No. 852/2004 regarding hygiene and foodstuffs.
Some application examples
- Grouting floors and walls in the food industry (dairies, abattoirs, breweries, wine-cellars, conserved-food plants, etc.), shops and areas where hygiene is required.
- Grouting industrial floors and walls (electrical industries, tanneries, battery rooms, paper-mills, etc.), where high mechanical resistance and resistance to acid attack is required.
- Grouting swimming pools; particularly suitable for basins containing salt or thermal water.
- Grouting tanks containing aggressive chemicals (purification plants, etc.).
- Grouting ceramic tiles on laboratory benches, kitchen work surfaces, etc.
- Acid-resistant bonding of tiles (used as an adhesive in compliance with class R2T specification according to EN 12004 standard).
- Bonding marble doorsteps and window- sills.
- Bonding tiles in plastic reinforced by fibre glass swimming pools.
- Bonding special pieces of tiles.
TECHNICAL CHARACTERISTICS
Kerapoxy is a two-component, very low emission of volatile organic compounds, epoxy-resin-based product with silica sand and special components, with excellent resistance to acids and excellent clean ability.
The following features are obtained when used correctly:
- Excellent mechanical and chemical resistance, therefore excellent durability.
- A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
- Easy workability and finishing.
- Becomes very hard and is highly resistant to heavy traffic.
- No shrinkage, therefore absence of cracks and fissures.
- Uniform colours that are resistant to ultra-violet rays and atmospheric agents.
- · Excellent bonding.
Additional Information
COLOUR | COLOUR |
---|