You have no items in your shopping cart.
Details
MULTIFILL 2-5 is a cement-based, coloured tile grout. It offers high mechanical strength and colour stability. Suitable for joint width 2-5 mm.
It is classified as type CG2 WA tile grout according to EN 13888.
Fields of application
MULTIFILL 2-5 is used for pointing tile joints on walls or floors, for indoor and outdoor applications.
Directions for use
1. Substrate
The substrate covered with tiles should be perfectly clean. The joints should be carefully cleaned and dampened with a wet sponge.
2. Application
MULTIFILL 2-5 is added to water under continuous stirring, until a uniform paste is formed. A low revolution mixer is recommended for the mixing.
The mixture should be left about 10 minutes to settle and then slightly stirred again.
Spread the grout on to the joints, using a rubber float in a diagonal direction to the joints, in order to fill them completely. The excess material should be wiped after a while, using a wet sponge. Finally, the surface may be cleaned with a dry cloth.
Outdoors or at high temperatures repeated dampening is recommended after a few hours and when the grout has dried.
MULTIFILL 2-5 is available in the following 34 colours, with the corresponding code No. and packaging
01 White
02 Black
03 Grey
04 Pearl grey
05 Light grey
06 Bahama beige
07 Redbrown
08 Brown
09 Light brown
10 Dark grey
11 Ivory
12 Purple
13 Red
14 Cotto
15 Manhattan grey
16 Light ochre
17 Anemone
18 Pearl beige
19 Mocha
20 Maroon
21 Caramel
22 Magnolia
23 Oregon
24 Cinnamon
25 Crocus
26 Green
27 Orange
30 Cement grey
31 Ceramic
32 Mykonos blue
33 Yellow
34 Mint
35 Tropical sea
36 Cypress
Additional Information
COLOUR | COLOUR |
---|