You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

EVERFLEX WEATHER MATE EVERBUILD C3 FILLER ADHESIVE GAP FILLER BITUMEN LEAD FELT

Be the first to review this product

Availability: In stock

£6.50

* Required Fields

£6.50

Details

EVERFLEX WEATHER MATE is a multi-use elastic filler that can be applied in wet weather and to wet surfaces, remaining permanently flexible.  Intended for external use only it can be overpainted with most paints and woodstains when cured. Adheres to most common surfaces.

 

Benefits

  • Can be applied in all weathers.
  • Sticks to wet surfaces.
  • Resists all weather conditions.
  • Permanently flexible.
  • Overpaintable.
  • Can be used in conjunction with Bitumen and asphalt.

 

Areas For Use

  • For all roofline applications.
  • Adheres to problematic surfaces such as bitumen, asphalt, lead and galvanized steel.
  • Perimeter gap filling around window and door frames – ideal for timber frames where woodstaining is required.
  • For jointing all types of guttering.
  • Filling cracks in stone tiles/slates etc.
  • For all external weatherproofing applications.
  • For filling gaps between metal and composite roof and wall panels to form an effective lap joint bond.
  • For remedial weather proofing over all sealants, putties and mastics.
  • General industrial metal panel bonding and gap filling e.g. in automotive and caravan manufacture.

 

Surface Preparation

All surfaces must be clean and dust free.  All loose or flaking surface coatings should be removed before application.  Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.

 

Application

Cut the tip of the cartridge taking care not to damage the thread.  Apply nozzle and cut cleanly at an angle of       45° with an opening slightly larger than the gap to be sealed.  Apply using a standard sealant gun.  Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed. Always tool down immediately following application using a spatula or piece of wood wetted with a soap and water solution.  When applied to wet surfaces tooling down is essential to ensure a proper bond with the surface is formed. The product is tack free after 10-15 minutes, and should be allowed to cure for 24 hours before painting.  Clean tools with white spirits.

 

Specific Data

 

 

Skinning Time

15 mins @ 20°C

Cure Time

2mm per 24 hours

Hardness Shore A

22

Shrinkage

10%

Service Temperature Resistance

-25°C to + 95°C     

Application Temperature Resistance

+5°C to + 50°C

Specific Gravity

0.9-1.0 g/cm3

Cleaning

Uncured sealant white spirit, cured to be removed mechanically

Minimum Joint Width

5mm

Maximum Joint Width       

35mm

Joint Ratio

Maximum depth 50% of joint width

Elongation At Break

350% DIN53504

 

 

Health & Safety

Consult MSDS for full list of hazards

 

Storage

Store in cool dry conditions with good ventilation and away from sources of ignition.

 

Shelf Life

Use within two years.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERFLEX WEATHER MATE EVERBUILD C3 FILLER ADHESIVE GAP FILLER BITUMEN LEAD FELT

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand