You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

EVERBUILD EVERFLEX SILICONE LMA 200 CONTRACTORS SILICONE SEALANT GENERAL PURPOSE GLAZING

Be the first to review this product

Availability: In stock

£4.00

* Required Fields

£4.00

Details

SILICONE 200 CONTRACTORS is a cost effective Acetoxy cure sealant that adheres to most smooth and non-porous materials. This product contains an anti-fungal compound to prevent mould growth in areas of high humidity.  SILICONE 200 is mid to low modulus in nature.

 

Benefits

  • ·      Permanently flexible.
  • ·      Anti-fungal formula - prevents mold growth.
  • ·      Quick curing - low dirt pick up.
  • ·      Low viscosity for fast application
  • ·      Certified under the harmonized European standard EN15651 for façade and sanitary applications in compliance with the Construction Product Regulations

 

Areas For Use

  • ·      Sealing aluminium and metal sealing.
  • ·      Sealing around baths, showers, basins and other sanitary ware.
  • ·      As an adhesive for fixing PVCu trims, cladding and panels.
  • ·      Sealing around worktops and laminates.
  • ·      Pointing and door frames.                  
  • ·      For aluminium gutter sealing.
  • ·      General draughtproofing.

 

Surface Preparation

All surfaces must be clean, dry and dust free.  All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.  Porous surfaces may require priming - a small area should be tested first.   

 

Application

Reference should be made to the recommended joint ratios.  If necessary reduce joint depth using EXPANDING FILL AND FIX FOAM, or Joint backer rod.  Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.

 

Cut the tip of the cartridge taking care not to damage the thread.  Apply nozzle and cut cleanly at an angle of       45’ with an opening slightly larger than the gap to be sealed.  Apply using a standard sealant gun.  Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.

 

Smooth down within 10 minutes of application.  To ensure a proper bond, always smooth the sealant down using a spatula or piece of wood wetted with a soap and water solution.  An improved appearance can be achieved by placing masking tape to both sides of the joint and removing within 5 minutes of application.

 

Specific Data

 

 

Movement accommodation:

+ or -12.5% ISO8339

Skinning time:        

5 mins @ 20°C

Cure time:

2mm per 24 hours

Hardness Shore A:

15-25

Service temperature resistance:

-30°C to + 150°C

Application temperature resistance

+5°C to + 40°C

Tensile Strength     

1.5 MPa

Stress

0.3MPa at 100% elongation DIN53504

Specific gravity:      

~1.00

Cleaning:

Uncured sealant  white spirit;

Cured sealant: EVERFLEX SILICONE EATER

Minimum joint width:

4mm

Maximum joint width:           

25mm

Joint ratio:

Maximum depth 50% of joint width

Coverage:

@ 10 linear metres, 9 x 9mm fillet joint

Elongation at break:

>400% ISO8339

 

 

Health & Safety

Consult MSDS for full list of hazards

 

Storage

Store in cool dry conditions between + 5’C and 25’C. 

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERBUILD EVERFLEX SILICONE LMA 200 CONTRACTORS SILICONE SEALANT GENERAL PURPOSE GLAZING

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand