You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

EVERBUILD EVERFLEX 115 G.P. BUILDING MASTIC POINTING SEALANT BLACK BROWN STONE

Be the first to review this product

Availability: In stock

£3.85

* Required Fields

£3.85

Details

EVERFLEX 115 GP BUILDING MASTIC is an oil based compound intended for general pointing and sealing of many joints in traditional forms of construction. The sealant is rapidly and simply applied by extrusion from a cartridge gun. The product has good adhesion to most clean, dry surfaces.

 

Benefits

  • Overpaintable.
  • Adheres to most common surfaces.
  • Semi drying - remains permanently elastic beneath surface skin.
  • High solids formulation - excellent gap filling properties without shrinkage.
  • Good external weathering properties.

 

Areas For Use

  • Perimeter pointing internally and externally around doors and windows.
  • Adheres to concrete, brick, wood, metals and glass without the use of a primer.               

Surface Preparation

The surfaces to be must be clean, dry and free from dust, grease and other contaminants. New concrete or mortar should be allowed adequate time to dry and mature.

 

Application

Joint design should be as follows: Minimum width: 5mm. Maximum width 20mm

Minimum depth:  10mm.  Maximum depth:  20mm for deep joints, reduce depth by using EVERFLEX FIX AND FILL FOAM or a suitable joint backer rod. All joints should be designed so that the seal is placed in a position which does not retain water or form a water trap.  Triangular fillets should be no less than 12mm across the face and should be finished with a flat or convex face. 

Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45o with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed. To ensure a proper bond, always smooth the sealant down with a spatula or piece of wood wetted with linseed oil or white spirits. An improved joint appearance can be achieved by placing masking tape to both sides of the joint, removing within 5 minutes of application.

 

Specific Data

 

 

Form

Thixotropic paste (ready to use)

Application Temp

5oC to 50oC

Coverage

Approx 10 linear meters per cartridge

Service Temp

-25oC to 70oC (90oC intermittent)

Cure

Normally 7 days, the mass below remaining elastic

Specific Gravity

1.6 approx

Flash Point 

65oC

Durability

Up to 10 years when used as recommended.

Compatibility

Can be used in contact with most building materials but should not be used against bituminous compounds

Slump

No slump at 70oC when placed in an 18 x 10mm aluminium channel positioned vertically

Cleaner

White spirits.

UV Resistance

Mechanical properties will not change, however, product may discolour. Overpainting is recommended

Movement Accom

low.

Overpaintability

Use conventional decorative paints to increase durability if required.

 

 

Health & Safety

Consult MSDS for full list of hazards

 

Storage

Store in original unopened containers between 15 and 20oC

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERBUILD EVERFLEX 115 G.P. BUILDING MASTIC POINTING SEALANT BLACK BROWN STONE

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand