You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

EVERBUILD 708 SELF LEVEL FLOOR COMPOUND 20KG GREY LEVELLING LEVEL FLOOR SCREED

Be the first to review this product

Availability: In stock

£17.00

Details

Everbuild Self Levelling Floor Compound is a cement based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Mix with either water or EVERBUILD FLOOR FLEX PLUS to give a free flowing self levelling topping.

When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures. NOTE: This product is not suitable for use as a final wearing surface.

 

Benefits

  • Enhanced flow properties coupled with long open time giving easy trowelling.
  • Fast setting - sets in 8 hours.
  • Up to 6mm in depth in one coat.
  • Protein (casein) free.
  • Internal/external use.

 

Areas for Use

  • For levelling uneven subfloors prior to covering/tiling

 

Surface Preparation

SAND/CEMENT RENDER

Allow at least four weeks drying before application. Dampen floors and prime with EVERBUILD PVA diluted 1:3 with water. Mix with water as detailed below. For surfaces to be subjected to heavy foot traffic, use EVERBUILD FLOOR FLEX PLUS rather than water when mixing the powder.

 

TIMBER FLOORS

Suitable for interior floors only.  Floors must be securely screwed down at 300mm centres. Apply Everbuild SBR Bond to the floor at a 1:1 dilution. Mix Everbuild Self Levelling Compound with Everbuild SBR Bond diluted 1:1 with water (20kg of powder to 5ltrs of 1:1 liquid mix) and apply to subfloor whilst the bonding coat is still tacky.

         

EXISTING VINYL TILES

Ensure tiles are clean and sound. Prime with Everbuild SBR diluted 1:1 with water and apply floor level compound mixed with FLOOR FLEX PLUS over tiles whilst primer coat is still tacky.  Allow 24 hours before applying final covering.

 

Application

Floors to be treated must be free from grease, dust and loose particles. Always prepare floors by dampening with water then priming with Everbuild PVA Bond diluted 1 part PVA to 3 parts water to give a sound, slightly damp surface.

 

20kg of self levelling powder will require 4 litres of water. Always add the powder to water. This should be carried out by stepwise addition whilst stirring until a free flowing creamy compound is produced.  Pour the mixture out into the prepared floor and allow it to find its own level. Trowel down lightly to achieve an overall thickness not exceeding 6mm. Where further finishing is required, allow the surface to stiffen, usually ¾ to one hour after application, and lightly sprinkle with water and carefully trowel to produce a smooth appearance. Do not sprinkle excessive water or over trowel at this stage.

Additional layers, each not exceeding 6mm, may be applied to achieve the required depth. Prime with Everbuild PVA Bond diluted 1:3 with water between layers.

 

For areas where deep depressions occur, (greater than 6mm in depth up to 15mm) , Add 1 part of clean, dry sharp sand to 1 part Self Levelling Compound. The sand should be added after mixing powder with water. It is advisable to reduce the amount of mixing water before adding sand, and then top up with water to achieve the correct consistency. Note: the flow characteristics will be affected by addition of the sand. If the product starts to stiffen or set, DO NOT try to remix or add extra water. Alternatively, use EVERBUILD DEEP FILL levelling compound which fills upto 50mm in one coat.

 

For areas where heavy loading and/or trafficking are anticipated on the final surface, mix Everbuild Self Levelling Floor Compound with neat Everbuild FLOOR FLEX PLUS rather than water. This will improve flexibility, adhesion and durability of the screed. The mixing ratio is again 20kg of powder to 5ltrs of FLOOR FLEX PLUS. Again, prime the floor with Everbuild PVA diluted 1:3 with water.

 

Specific Data

 

 

Appearance

Fine grey powder

SG at 20°C

1.63gcm³ (dry) 2.3 gcm3  (wet or cured)

Application Temp

4oC to 35oC

Service Temp

-30 to 70oC.

Open Time

30 mins @20oC

Thickness

0.5mm- 6mm

Setting Time

8 hours @20oC

Storage

Store at moderate temperatures. PROTECT FROM DAMP

Coverage

20kg covers approximately 4m2  at 3mm (standard) depending on porosity of substrate

 

 

Health & Safety

Consult MSDS for full list of hazards.

 

Storage

Store at moderate temperatures. PROTECT FROM DAMP.

 

Shelf Life

9 months from date of manufacture when stored according to manufacturer’s instructions.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERBUILD 708 SELF LEVEL FLOOR COMPOUND 20KG GREY LEVELLING LEVEL FLOOR SCREED

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand