You have no items in your shopping cart.
Details
A ready to use, PVA timber adhesive which is suitable for use in damp and humid conditions.
Bond It DUO “2 IN 1” WOOD GLUE meets the requirements of BS 4701 Creep Resistance standard and EN 204 D3. It is also suitable for use with RF bonding machinery.
Uses
DUO “2 IN 1” WOOD GLUE can be used as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive. Suitable for hard and soft woods, decorative laminates, chipboard blockwood and other engineered timber panels. Not suitable for permanent immersion in water.
Preparation
Surfaces to be bonded must be clean, dry and free from dust, grease or contaminants that may hinder adhesion.
Application
Apply the adhesive to one surface only and bring the two surfaces together within 3-4 minutes and clamp for approximately 1 hour. After 1 hour careful handling is permittable. Glued components should be left overnight before machining. Remove excess adhesive whilst wet using a damp cloth. When using RF bonding techniques the user must explore the most efficient combination of glue application, power and dwell time as each of these varies with different machinery and constructions.
Container Size
125ML, 250ML, 500ML, 1LTR, 2.5LTR, 5LTR, 25LTR
Shelf Life
Use within 6 months.
Storage Conditions
Store in cool, dry conditions between a temperature of 5°C and 35°C. Protect from frost and direct sunlight.
Additional Information
COLOUR | COLOUR |
---|