You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

ANCHORSET GREEN 300 EVERBUILD 300ML CHEMICAL ANCHOR RESIN CONCRETE

Be the first to review this product

Availability: In stock

£6.63

Details

ANCHORSET GREEN is a styrene free rapid curing chemical anchoring system designed for high strength fixing of railings, satellite dishes, signs, brackets and other fixtures which carry heavy loads. The unique EASY-FLOW technology of ANCHORSET GREEN means the twin bag system within the cartridge enables the product to be applied using a standard cartridge gun.

Benefits

  • Easy mix twin bag system.
  • Styrene free low odour.
  • Apply using a standard sealant gun.
  • Rapid curing system.

Areas For Use

  • Fixing wall ties.
  • Bolts and screws into a wide range of building substrates.
  • Securing machinery into floors.
  • Fixing studs and starter bars.

Surface Preparation

Drill hole to the correct diameter and depth (see chart for guide), ideally using a rotary percussion machine. For optimum results the hole must be coarse sided. If the holes are produced by diamond drilling the surfaces should be thoroughly roughened. Remove all dust and debris from the hole using a hand air pump or a stiff rotary brush. All bars should be clean and free from oil or grease and all flaking rust should be removed. Threaded rod or studs should be chisel-ended to prevent them being unscrewed from the cured resin.

Application

Unscrew the lid and cut off the top of the bag under the metal clamp. Attach the mixing nozzle to the cartridge (screw down hand tight). Place cartridge into the dispensing gun. Gradually pressurise the Cartridge by activating the hand trigger a few times until material passes through the mixing nozzle and an even colour is obtained (approximately 5-6 inches of extruded material should be adequate). Once the desired fill is achieved release the pressure by pressing the slide release arm and pulling back the slide rail, wipe off excess material and insert the fixing slowly, with a rotating action, to the desired depth.

Specific Data

Compressive Strength (ASTM D695)

63 N/mm²

Tensile Strength (ASTM 638)

< 10 N/mm²

Elastic Modulus (ASTM D695)

6300 N/mm²

Mixed Density

1.8 g/cm³

Mixing Ratio

10:1 by volume as supplied in cartridge

Temperature

(°C) (°F)

Gel Time

(Minutes)

Minimum Loading Time

(Minutes)

5 41

15

120

10 50

12

90

15 59

8

60

20 68

6

45

25 77

4

30

Performance data for rods in concrete

ANCHOR SIZE

(mm)

HOLE DIAMETER

(mm)

HOLE DEPTH

(mm)

TENSION (kN)

(Ultimate pull out)

Tensile Load (kN)

Shear Load (kN)

FIXINGS PER UNIT

(Holes filled 2/3 full) 300ml

8

10

80

14.7

4.9

5.8

68

10

12

90

20.5

6.8

9.2

42

12

14

110

34.6

11.5

13.4

25

16

18

125

47.9

16.0

24.9

13

20

22

170

81.4

27.1

39.2

5

Tension Figures quoted are tested in approximately 20/25 N/mm2 concrete 

Health & Safety

Consult MSDS for full list of hazards.

Storage

Store in cool dry conditions between + 5°C and 25°C.

Shelf Life

Use within 12 months.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: ANCHORSET GREEN 300 EVERBUILD 300ML CHEMICAL ANCHOR RESIN CONCRETE

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand