You have no items in your shopping cart.
Details
A high strength, anaerobic adhesive for the permanent retention and sealing of threaded fasteners, sleeves and bearings. It is resistant to fuels, oils, hydraulic and refrigeration fluids.
Uses
Bond It A70 STUDLOCK can be used for fixing and sealing of plugs, through bolts and studs into castings, etc. It eliminates split pins, double nutting and spot welds and is vibration proof. A70 STUDLOCK also acts as a lubricant during assembly to ensure accurate torquing and protection against corrosion. Use of A70STUDLOCK improves throughput and efficiency.
Preparation
Surfaces must be clean, dry and free from grease.
Application
Coat threads and ensure the adhesive is present at locking position. The adhesive starts to cure on exclusion of air from the bonding system. Observe handling and strength times stated below.
Bonding Time
Assuming room temperature is 20oC.
Initial strength approximately 10 minutes.
Full working strength 6-12 hours.
Ultimate cure 24 hours.
Storage Conditions
Store in a closed upright container between 3 and 20°C in dry dark conditions. At low temperatures the shelf life will be prolonged.
Shelf Life
Minimum shelf life 6 months @ 20oC.
Additional Information
COLOUR | COLOUR |
---|