You have no items in your shopping cart.

Subtotal: £0.00

image

More Views

EVERBUILD 502 ALL PURPOSE WEATHERPROOF WOOD ADHESIVE GLUE

Be the first to review this product

Availability: In stock

£3.50

* Required Fields

£3.50

Details

EVERBUILD ALL PURPOSE WATERPROOF WOOD ADHESIVE is a medium viscosity, resin based polymer emulsion which exceeds the water resistance requirements of BS EN204 D3. The product is also suitable for load bearing work as it conforms fully to the BS 14256 Sustained Load requirements.

 

Benefits

 

  • ·      Excellent rate of bond strength development.
  • ·      High degree of water resistance. D3 Classification- joints may be subject to short term water contact or exposure to high humidity.
  • ·      Interior/exterior use.
  • ·      Low timber staining characteristics - will not stain.
  • ·      Creep Resistant.
  • ·      Dries clear - contains no inert fillers.
  • ·      Water based - environmentally friendly/easy clean up.
  • ·      Suitable for radio frequency cure.

 

Areas For Use

 

As a waterproof/creep resistant wood adhesive, internally and externally.

 

Surface Preparation

 

All surfaces must be clean, dry and free from grease.

 

Application

 

Apply adhesive thinly to both surfaces.  Do not over apply as this will slow down cure. Clamp surfaces together until adhesive dries.  (off in 1-2 hours: full strength 8 hours). Support until fully cured (8 hours at 20°C).

When fitting dowels, the adhesive should be applied to the holes.

  • ·      Suitable for radio frequency curing.

 

Specific Data

 

Total Solids (%)

49-52%

Viscosity @ 23°C

Brookfield RTV 5/20

7000-15000cps

 

pH

2.0-4.0

High Temperature Stability (4 week @ 50°C)

Stable

Specific Gravity

1.0-1.2 (dispersion)

 

PRODUCT

EN204 D3/3

BSEN 14256

Everbuild A/P Wood Adhesive

Ave 2.2 N/mm²

15.3 days

Specification

≥2.0 N/mm²

≥ 14 days

 

Health & Safety

 

Consult MSDS for full list of hazards.

 

 

Storage

 

To ensure safe storage of ALL PURPOSE WOOD ADHESIVE , containers should be well sealed to prevent evaporation of water and the formation of skin on the surface.  The emulsion must be stored at a temperature above freezing.  A temperature of 5-25°C for not more than six months is recommended.  Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.

 

During storage, slight separation may occur. (thin layer above thicker layer). This is an esthetic rather than technical problem. In this case, shake well before applying.

 

If these conditions cannot be met, please refer to our Technical Service Department who will advise on storage stability.

 

Shelf Life

 

12 months from date of manufacture.

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERBUILD 502 ALL PURPOSE WEATHERPROOF WOOD ADHESIVE GLUE

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand