You have no items in your shopping cart.

Subtotal: £0.00

IMAGE

More Views

EVERBUILD 45 MINUTE PU WOOD ADHESIVE POLYURETHANE LIQUID 750GRM FAST SETTING

Be the first to review this product

Availability: In stock

£8.40

Details

LUMBER JACK 45 MIN is a professional quality one part moisture curing wood adhesive with rapid setting properties. These products are available in three forms:

 

As well as bonding all common wood types (hard, soft, exotic, painted) LUMBERJACK PU WOOD ADHESIVES will also bond Formica, polystyrene, PU foam metal and glass wool and various plastics (including PVC) to porous surfaces. These products also adhere to stone, concrete, brick and masonry.

 

Benefits

 

  • Fast setting – 45 minute set (Typical PVA based wood glue – 8-12 hours)
  • Exceptional bond strength to wood and most common building surfaces.
  • Internal and external use - excellent weathering and aging properties.
  • Fully water proof to EN204 D4, including seawater.
  • Products foam slightly on application to fill small gaps and increase overall bond strength.
  • Excellent Chemical Resistance.

 

Areas For Use

 

  • General wood jointing and construction
  • Window and door frame manufacture
  • Door manufacture
  • Furniture manufacture
  • Boat building
  • Construction of staircases and ladders
  • As a high quality insulation adhesive for foam/glasswool/fibre boarding

 

Surface Preparation

 

The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive. To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet.

 

Application

 

Cartridge Products: Cut tip of cartridge taking care not to damage the thread. Fix nozzle, cut to required aperture and apply using standard sealant gun.

Liquid version: Remove cap, cut spout and apply. Replace cap after use.

Wearing of gloves is recommended. Apply adhesive evenly to one surface. If necessary, cover large areas with a fine toothed spreader. Assemble parts IMMEDIATELY and clamp for duration of cure (5-30 minutes at 20oc; longer at lower temperatures). After this time, the joint may be easily handled. Full and final bond strength will be achieved after 24 hours.

NOTE: These products foam slightly on application to fill small gaps. Any excess foam/adhesive must be removed with acetone before the product sets or with a sharp chisel once set.

 

Specific Data

 

Colour

Gels: Translucent

Liquid: 5 Min: Red, 30 Min: Brown

Contents

100% prepolymers and catalyst (solvent free)

Solids

100% (solvent free)

Viscosity

200 x10 mPa.s  (bfld RVT sp7 5rpm) (gel)

Coverage

400g/m², or 10 linear meters per tube (approx)

Initial Set Time

45min

Flash Point

N/A

Cleaner

Everbuild Gun Foam Cleaner or acetone BEFORE curing. After cure, use mechanical abrasion.

 

Health & Safety

 

Consult MSDS for full list of hazards.

 

Storage

 

Store in original unopened containers between 10 and 25oC. Reseal immediately once used or disposal will be necessary

 

Shelf Life

 

Twelve months from date of manufacture in original unopened containers

 

Additional Information

COLOUR COLOUR

Customer Reviews

Write Your Own Review

You're reviewing: EVERBUILD 45 MINUTE PU WOOD ADHESIVE POLYURETHANE LIQUID 750GRM FAST SETTING

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Brands

  • brand
  • brand
  • brand
  • brand
  • brand
  • brand