25L WATERSEAL BRICK STONE MORTAR CONCRETE WATERPROOF SEAL & FROST PROTECT 25LTR

A premium waterseal designed to repel water from masonry work which allows walls to breathe, reducing the risk of damage caused by water and frost.

 

 

 

Uses

 

 

 

Bond It WATERSEAL is used as a masonry waterproofer suitable for use on brick, stone and concrete. It protects against water and frost, providing a breathable coating which does not change the physical appearance of a building.

 

A secondary benefit of the product is to repel waterborne dirt and resist fungal growth as well as help reducing heating costs as energy is not wasted in drying out wet walls.

 

 

 

Preparation

 

 

 

Ensure all surfaces are dry and free from dirt, mosses and lichens. For stubborn mosses and lichens use Bond It MOULD & MILDEW WASH. Allow a minimum of 24 hours for fresh pointing to dry before application.

 

 

 

Application

 

 

 

Apply using a low pressure spray (non-atomising) or brush at a rate of 3m² per litre for porous stone and 5m² per litre for hard brick, allowing 6 hours to dry before applying a second coat. Always apply with a smooth action starting at the top and working your way down the wall. Care should be taken not to splash or mist cars, windows, painted surfaces, plants and ponds. Two coats are recommended for best results, however more coats can be applied.

 

 

 

Coverage

 

 

 

3 - 5m² per litre depending on porosity of substrate.

 

 

 

Storage Conditions

 

 

 

Store in cool, dry conditions between 5 and 30oC.

 

 

 

Shelf Life

 

 

 

12 months in original, unopened containers.